10 Kwɛstyɔn dɛn fɔ Aks Bifo Yu Bay Day Kɔt ɛn Kris Mashin

Wetin yu fɔ aks bifo yu bay mashin we de kɔt day? Dat na big disishun, ɛn yu want fɔ mek i rayt. We yu aks di rayt kwɛstyɔn dɛn fɔ aks, dat kin ɛp yu fɔ fɛn mashin we go gri wit wetin yu nid. Di tin dɛn we yu nid kin gɛt fɔ du wit di sayz fɔ di prɔjek, di say we yu fɔ wok, ɔ di gol dɛn we yu fɔ gɛt fɔ mek di wok. Dɛn nid ya de shep di tin dɛn we yu kin pik fɔ bay. Rayt kwɛstyɔn dɛn we yu go aks bɔt wetin yu nid. Tink bɔt wetin yu nid ɛvride, wetin yu nid tumara bambay, ɛn ivin wetin yu nɔ bin de tink se go nid. Mɔ kwɛstyɔn dɛn fɔ aks min bɛtɛ rizɔlt fɔ yu nid dɛn. Oyang ɔndastand yu nid dɛm ɛn i de gi yu trɔst day-kɔtin sɔlvishɔn fɔ ɔl yu bay nid dɛm.

Ki tin dɛn we dɛn kin tek fɔ tek

• Tink bɔt wetin yu nid bifo yu bay mashin we de kɔt day. Yu fɔ no us kayn prɔjek yu want fɔ du, lɛk fɔ pak ɔ kraft.

• Fɔ no ɔmɔs yu go mek ɛvride. Pik wan mashin we go ebul fɔ du yu wok. Dis kin ɛp ɔltin fɔ rɔn fayn ɛn fast.

• Pik if yu want mashin we yu kin yuz fɔ yuz yu an ɔ we yu kin yuz ɔtomɛtik. Otomatik mashin dɛn kin ɛp yu fɔ sev tɛm ɛn mek smɔl mistek dɛn. Dɛn bɛtɛ fɔ big big prɔjek dɛn.

• Mek shɔ se di mashin de wok wit yu matirial dɛn. Chek if i kin kɔt di tik ɛn di kayn tin dɛn we yu want fɔ yuz.

• Luk aw bɔku ples yu gɛt. Mekɔp yu rum fɔ si if di mashin go fit. Yu nid ples fɔ yuz di mashin izi wan.

Kwɛstyɔn dɛn we yu fɔ aks bɔt di tin dɛn we di prɔjek nid

Di kayn Projɛkt dɛn we dɛn Sɔpɔt

We yu want mashin we de kɔt day, tink bɔt yu prɔjɛkt dɛn. Yu de mek pepa bɔks ɔ pepa bag? Sɔntɛm yu nid spɛshal kraft pies fɔ dɛkɔreshɔn ɔ kad. Sɔm mashin dɛn fayn fɔ pak wok. Ɔda wan dɛn bɛtɛ fɔ kraft wok lɛk stika ɔ lɛbl.

Na sɔm kɔmɔn prɔjek dɛn we kɔmɛshɔnal mashin dɛn kin du:

• Kadbɔd ɛn katon pak

• Fom pat fɔ pak

• Plastik pat dɛn fɔ pak

• Rɔba pat dɛn fɔ pak

• Fabrik ɛn fayv fɔ pak

• Kis-cut stika ɛn lɛbl fɔ kraft prɔjɛkt dɛn

• Shaped decals fɔ kraft prɔjek dɛn

• Kastom day kot pies fɔ pak ɛn ditayl kraft dizayn

Tip: Dɛn kin yuz kɔmɛshɔnal mashin dɛn we dɛn kin yuz fɔ kɔt day fɔ pak tin dɛn. Dɛn kin ɛp bak wit kraft prɔjɛkt dɛn na motoka, klos, ɛn kɔstɔm pepa prɔdak dɛn. Yu kin mek pepa sɛmpul, kip sayn dɛn, ɛn rɔba gasket wit dɛn.

We yu no wetin yu prɔjek nid, dat kin ɛp yu pik di rayt mashin . Yu want mashin we fit yu pepa matirial, di saiz we yu de projɛkt, ɛn aw yu nid am di rayt we. Dis kin mek i izi fɔ kɔt day ɛn i kin mek di pepa west nɔ bɔku.

Volyum fɔ Prodakshɔn

Prodakshɔn volyum na ɔda tin impɔtant tin fɔ aks bɔt. Ɔmɔs pepa yu nid ɛvride? If yu de du biznɛs fɔ pak tin dɛn ɛn yu de mek pas 100 pepa bɔks dɛn ɛvride, yu nid mashin we fast ɛn kɔrɛkt. Indastrial mashin dɛn kin ol bɔku pepa ɛn difrɛn tin dɛn. Dɛn kin kip yu pak prɔses kwik ɛn yu kraft prɔjek dɛn stedi.

If yu jɔs mek sɔm kraft tin dɛn ɔ pak sɛmpul dɛn, sɔntɛm wan smɔl mashin go du fɔ yu. Fɔ gɛt big gol, pik wan mashin we de kɔt day we go ebul fɔ du wetin yu nid fɔ pepa. Dis kin mek yu pak ɛn kraft prɔjek dɛn go ɛn yu prɔses smol smol.

Notis: We yu no yu prodakshɔn gol dɛn, dat de ɛp yu fɔ pik wan mashin we fit yu pepa prɔjek nid ɛn ɛp yu pak biznɛs fɔ gro.

Die-Cutting Machine Types fɔ Bay

Manual vs. Ɔtomɛtik

We yu de shop fɔ a die-cutting machine , yu go si tu men kayn. Wan kayn na manual. Yu kin yuz yu an fɔ tɔn wan handel ɔ pres wan lev. Manual mashin dɛn nɔ kin tek bɔku mɔni. I izi fɔ yuz dɛn fɔ smɔl smɔl wok dɛn. Dɛn kin wok fayn fɔ kraf ɔ we yu nɔ nid fɔ kɔt bɔku pat.

Mashin dɛn we de kɔt day ɔtomɛtik kin du bɔku pan di wok fɔ yu. Dɛn kin yuz motoka ɛn kɔntrol fɔ kɔt ɛn kris di tin dɛn kwik kwik wan. Yu sɛt di mashin ɛn mek i rɔn. Na dis na aw dɛn kɔmpia:

• Manual mashin dɛn nid mɔ tray ɛn tɛm frɔm yu.

• Otomatik mashin dɛn kin dɔn wok kwik kwik wan wit ɔtomatik day kɔt.

• Otomatik mashin dɛn kin kɔt mɔ pat dɛn insay smɔl tɛm.

• Otomatik min se mistek nɔ bɔku ɛn di rizɔlt dɛn we nɔ de chenj.

• Yu de sev leba ɛn yu de du mɔ wit smɔl tray.

If yu want yu biznɛs fɔ gro ɔ fɔ handle big ɔda, ɔtomɛtik ɔ dijital day-kɔt mashin dɛn na di bɛst. Dɛn gud bak fɔ mek bɔku bɔku kɔstɔm shep dɛn wit smɔl wok.

Oyang otomatik day kot & kris mashin

Yu nid mashin we de kɔt day fɔ big wok dɛn? Di Oyang pipul dɛn Automatic Die Cutting & Creasing Machine na wan fayn tin fɔ pik. Dis dijital mashin we de kɔt day kin fast, i kin kɔrɛkt, ɛn i nɔ bad. I kin kɔt bɔku tin dɛn lɛk kadbɔd ɛn plastic fim.

Na sɔm impɔtant tin dɛn we di Oyang mashin gɛt:

Sefty ficha dɛn de protɛkt di wokman dɛn ɛn ɛp di mashin fɔ wok fayn.

Dis mashin de mek yu kɔstɔmayt ɛn chenj as yu nid dɛn de gro. I pafɛkt fɔ biznɛs dɛn we want fɔ kɔt day we pɔsin kin abop pan, ɔtomɛtik. Yu kin gɛt smɔl west ɛn mɔ autput. If yu want dijital dai-katin mashin we de gro wit yu biznis, Oyang na smat pik.

Yuz-Frendliness fɔ Day-Kɔt Mashin dɛn

Sɛtup ɛn Ɔpreshɔn

Fɔ bigin wit mashin we de kɔt day fɔ izi. Sɔm mashin dɛn at fɔ mek, bɔt ɔda wan dɛn simpul. Oyang in mashin dɛn gɛt smat sistem ɛn izi kɔntrol panɛl dɛn. Yu kin fala di step dɛn we de na di skrin. Dis kin mek yu nɔ kɔnfyus. I de mek yu wok pan yu kraf dɛn we yu nɔ de wɔri bɔt di mashin.

Lɛ wi si aw sɛtup de chenj wit difrɛn brand dɛn:

Tip: Smat kɔntrol panɛl de sev tɛm ɛn ɛp yu fɔ avɔyd mistek.

Kɔmɔn setup prɔblɛm na jam , tin nɔ layn, ɛn fidin ishu. Di we aw Oyang mek am de ɛp fɔ stɔp dɛn prɔblɛm dɛn ya. Dis kin mek yu kraft dɛn go fayn fayn wan.

I fayn fɔ Pipul dɛn we De Bigin

If yu na nyu pɔsin, yu want mashin we izi fɔ yuz. Di mashin dɛn we Oyang de yuz fɔ kɔt day de wok fɔ di wan dɛn we sabi ɛn di wan dɛn we de bigin fɔ wok. Di kɔntrol panɛl gɛt simpul aykɔn dɛn ɛn instrɔkshɔn dɛn. Yu nɔ nid fɔ bi teknɔlɔji ɛkspɛkt fɔ bigin fɔ kraft na os ɔ na smɔl shɔp.

Na dis na wetin mek wan mashin we de kɔt day fayn fɔ di wan dɛn we de bigin:

Bɔku pipul dɛn kin bigin wit smɔl smɔl tin dɛn we dɛn kin du wit dɛn an, lɛk kad ɔ dɛkɔreshɔn. Oyang in mashin dɛn de mek yu tray nyu aydia dɛn we yu nɔ gɛt strɛs. Yu kin yuz difrɛn tin dɛn ɛn difrɛn shep dɛn. Dis kin mek kraft fayn ɛn izi. Ilɛksɛf yu de kraft na os ɔ na shɔp we bɔku pipul dɛn de, izi mashin kin ɛp bɔku. Di rayt tin dɛn de mek yu pe atɛnshɔn pan yu kriaytiv, nɔto di had stɛp dɛn.

Di Kɔst ɛn Valyu fɔ Bay

Fɔs Prays

We yu de luk fɔ mashin we de kɔt day, . bɔku tɛm, prayz na di fɔs tin we yu kin chɛk. Prays kin rili difrɛn dipen pan us kayn mashin yu want. Sɔm mashin dɛn simpul ɛn dɛn nɔ kin tek bɔku mɔni. Ɔda wan dɛn dɔn go bifo ɛn dɛn de kɔst mɔ. Na dis na fɔ luk kwik kwik wan pan wetin yu go pe:

Wan besik mashin fɔ kɔt day fayn fɔ smɔl wok ɔ fɔ du tin dɛn we pɔsin kin du wit in an. If yu nid mashin fɔ biznɛs ɔ big prɔjek, yu kin want wan ful ɔtomɛtik mɔdel lɛk di Oyang Ɔtomatik Day Kɔt & Kris Mashin. Dis kayn de gi yu mɔ spid ɛn bɛtɛ kwaliti.

Mentɛnans we De go bifo

Di kɔst fɔ mashin nɔ kin stɔp afta yu bay am. Yu nid fɔ tink bak bɔt aw fɔ mek di say dɛn we dɔn pwɛl. We yu de klin ɛn chɛk di pat dɛn ɔltɛm, dat kin ɛp yu mashin we de kɔt day fɔ las fɔ lɔng tɛm. Sɔm brand dɛn kin mek dis izi. Dɛn bil Oyang mashin dɛn strɔng ɛn dɛn simpul fɔ mentenɛns. Yu kin gɛt wan ia warranty ɛn layf-taym sɔpɔt, so yu nɔ nid fɔ wɔri fɔ fɛn ɛp if sɔntin nɔ apin.

Tip: If yu mentenɛns yu mashin fayn, dat de mek yu mashin wok fayn ɛn i de protɛkt yu invɛstismɛnt.

Valyu fɔ Lɔng Tɛm

Tink bɔt di ɔl mɔni we yu go spɛn fɔ gɛt di prɔpati, nɔto jɔs di prayz we yu go gɛt. Wan ay kwaliti mashin we de kɔt day kin sev yu mɔni as tɛm de go. Dɛn kin mek oyang mashin dɛn fɔ yuz fɔ lɔng tɛm. Dɛn de gi yu stedi kwaliti ɛn smɔl brekdaun. Yu kin gɛt sɔpɔt fɔ di layf we yu mashin de liv, we min se yu nɔ go gɛt bɔku tɛm fɔ wok ɛn yu go ebul fɔ du mɔ wok. We yu pik mashin we go las, yu go gɛt mɔ valyu fɔ yu mɔni.

Wan mashin we pɔsin kin abop pan wit strɔng sɔpɔt de ɛp yu biznɛs fɔ gro ɛn kip yu wok na di rayt rod.

Kwɛstyɔn dɛn bɔt di Kɔmpatibiliti fɔ di Matirial

Di Tin dɛn we Dɛn Sɔpɔt

Mashin dɛn we dɛn kin yuz fɔ kɔt day nɔ kin kɔt ɔl di sem tin dɛn. Yu nid fɔ chɛk if yu mashin ebul kɔt wetin yu de yuz . Sɔm mashin dɛn kin jɔs kɔt pepa. Ɔda wan dɛn kin kɔt plastic, rɔba, ɔ fom. If yu want fɔ mek pak, yu go nid fɔ kɔt tik tik kadbɔd ɔ laminated sheet. Fɔ kraf, yu kin yuz tin dɛn we soft lɛk felt ɔ tin plastic.

Na sɔm tin dɛn we dɛn kin yuz fɔ kɔt day ɛn kris fɔ kɔmɛshɔn:

Sɔm mashin dɛn kin kɔt bak:

• Elastom ɛn rɔba

• Nioprene we dɛn kɔl

• Silikɔn we dɛn kɔl

• Etilɛn Prɔpilin (EPDM) .

• Nitril (NBR ɛn Buna-N) .

• Stayrin Butadiɛn (SBR) .

Tip: If yu nɔ shɔ bɔt wan matirial, chɛk di manual ɔ aks di pɔsin we de gi yu di tin.

Oyang in Ɔtomatik Day Kɔt & Kris Mashin kin kɔt bɔku matirial dɛn. I de wok wit pepabɔd, kɔrɛg bod, ɛn plastic fim. Dis de gi yu mɔ tin dɛn fɔ pik fɔ yu prɔjek dɛn.

Tik ɛn Sayz

Tik ɛn saiz impɔtant we yu de pik mashin we de kɔt day. Sɔm mashin dɛn kin jɔs kɔt tint sheet dɛn. Ɔda wan dɛn kin kɔt tik tik stak ɔ big bod. Bɔku pan di kɔmɛnt mashin dɛn kin kɔt tin dɛn we tik te to .060 inch. Dis de kɔba bɔku plastic dɛn lɛk ABS, polyethylene, ɛn rigid PVC. Fom, insuleshɔn, ɛn gasket matirial dɛn bak fit insay dis rɛnj.

Na dis na tebul we de sho wetin sɔm mashin dɛn kin kɔt:

Oyang in WH-1050S mɔdel kin kɔt sheet dɛn we gɛt 1050 x 750 mm (lɛk 41 x 29 inch). I kin kɔt matirial dɛn we tik te to 4 mm. Dis na gud tin fɔ big pak wok ɔ kɔstɔm prɔjek.

• Bɔku pan di mashin dɛn we de kɔt day kin wok fayn wit tin dɛn we tik ɔnda .060 inch.

• Di tin dɛn we dɛn kin yuz fɔ mek tin dɛn na:

  • Plastik sheet (PET, PVC, PP) .

  • Rɔba ɛn ɛlastɔma pat dɛn

  • Fom ɛn EVA matirial dɛn

  • Multi-layer laminated prodakt dɛn

Notis: Ɔltɛm mɛzhɔ yu matirial dɛn bifo yu bay mashin. Dis kin ɛp yu fɔ avɔyd fɔ jam ɛn fɔ west di tin dɛn we yu nid.

We yu pik di rayt mashin, dat kin mek yu yuz mɔ tin dɛn ɛn dɔn mɔ prɔjek dɛn we yu nɔ gɛt prɔblɛm.

Wokples ɛn Flɔ Spays

Instɔlɛshɔn Futprin

Bifo yu bay mashin we de kɔt ɛn kris, luk gud wan na di say we yu de wok. Yu want fɔ mek shɔ se di mashin fit ɛn nɔ krawd yu eria. Ɛni mashin nid sɔm ples, nɔto jɔs fɔ di mashin insɛf bɔt fɔ muv rawnd am ɛn fɔ mek mentenɛns.

Na dis na wetin yu fɔ no bɔt di tipik futprin fɔ dijital day-kɔt mashin:

• Di mashin kin nid lɛk 1,335 x 1,065 mm ples na di flɔ.

• Di ayt na arawnd 1,080 mm.

• Yu go nid ɛkstra rum fɔ lod di matirial dɛn ɛn pul di pis dɛn we dɔn dɔn.

Oyang in Automatic Die Cutting & Creasing Machine big pas sɔm besik mɔdel dɛn. Dɛn bil am fɔ wok we bɔku pipul dɛn kin du, so i kin tek mɔ ples. Chek di mashin in saiz ɔltɛm na di prɔdak ditil dɛn. Mekɔp yu wokples bifo yu bay. Dis kin ɛp yu fɔ avɔyd fɔ sɔprayz di de we dɛn de sɛn di pikin.

Tip: Drɔ di mashin in autlayn na yu flɔ wit tep. Dis trik de ɛp yu fɔ si if yu gɛt inof ples fɔ di mashin ɛn fɔ waka rawnd am.

Di Kɔndishɔn dɛn we de na di Envayrɔmɛnt

Di ples usay yu put yu mashin we de kɔt day, impɔtant pasmak. Mashin dɛn lɛk stedi kɔndishɔn. If di rum wam pasmak, kol pasmak, ɔ wet pasmak, di mashin nɔ go wok fayn. We di tɛmpracha ɔ di humidity chenj, dat kin mek prɔblɛm wit di pat dɛn na di mashin. Dɛn kin mek bak yu matirial dɛn kɔl ɔ stik togɛda.

Tray fɔ kip yu wokples na stedi tɛmpracha ɛn humidity. Dis kin ɛp yu mashin fɔ las fɔ lɔng tɛm ɛn i kin mek di say dɛn we yu kɔt klin ɛn shap. If yu de wok na westɛm ɔ garaj, tink bɔt fɔ ad fan ɔ dihumidifier. Wan kɔmfyut envayrɔmɛnt min se yu nɔ go gɛt bɔku prɔblɛm dɛn ɛn yu go gɛt bɛtɛ tin fɔ du.

Notis: Ɔltɛm chɛk yu wokples bifo yu instɔl nyu mashin. Oyang in mashin dɛn kam wit klia saiz ɛn sɛtup gayd fɔ ɛp yu fɔ plan bifo tɛm.

Aksesɔri ɛn Tul dɛn we Dɛn Nid

Impɔtant Aksesɔri dɛn

Ɔl di mashin dɛn we de kɔt day ɛn kris nid sɔm bɛsik tul dɛn. Dɛn tul ya de ɛp yu ikwipmɛnt fɔ wok fayn ɛn las fɔ lɔng tɛm. Na sɔm impɔtant aksesɔri dɛn we yu fɔ gɛt:

• Fɔ kɔt day: Dɛn shep ya kin ɛp yu ikwipmɛnt fɔ kɔt pepa, kadbɔd, ɔ plastic. Yu nid difrɛn day fɔ ɛni prɔjek.

• Plɛt fɔ kɔt: Dɛn tin ya kin protɛkt yu ikwipmɛnt ɛn ɛp fɔ mek yu kɔt klin. Chek dɛn bɔku tɛm fɔ si if dɛn dɔn pwɛl.

• Gripa bar: Dɛn tin ya kin ol yu matirial dɛn na dɛn ples we di ikwipmɛnt de wok. Gud gripa bar dɛn kin ɛp fɔ mek yu kɔt dɛn stret.

• Lubrication oil: Dis kin ɛp yu ikwipmɛnt fɔ rɔn kwayɛt wan ɛn stɔp fɔ mek rɔst nɔ fɔm.

• Fɔ klin brɔsh: Dɔst ɛn skrap kin gɛda insay yu ikwipmɛnt. Brush de ɛp yu fɔ kip ɔltin klin.

Tip: Kip wan smɔl tulbɔks nia yu ikwipmɛnt. Dis kin mek am izi fɔ grap tul dɛn ɛn sɔlv smɔl prɔblɛm dɛn kwik kwik wan.

Ad-Ons dɛn we yu kin pik

Yu want yu ikwipmɛnt fɔ du mɔ? Yu kin ad spɛshal tul ɛn tin dɛn fɔ mek i bɛtɛ. Dɛn ad-ɔn dɛn ya de ɛp yu ikwipmɛnt fɔ wok fast, yuz smɔl ɛnaji, ɛn mek smɔl mistek. Na sɔm ad-ɔn dɛn we pipul dɛn lɛk:

Yu nɔ nid ɛni ad-ɔn wantɛm wantɛm. Start wit di besik tul dɛm ɛn ad mɔ as yu ikwipmɛnt nid fɔ chenj. Dɛn tul ya de ɛp yu ikwipmɛnt dɛn fɔ de ɔp to date ɛn rɛdi fɔ nyu prɔjek dɛn.

Notis: Aks yu spɔlayt us ad-ɔn dɛn we de wok wit yu ikwipmɛnt mɔdel. Di rayt tul dɛn kin ɛp yu ikwipmɛnt fɔ las fɔ lɔng tɛm ɛn wok fayn.

Mentɛnans ɛn Rilaybiliti

Klin ɛn Kip

Tek kia ɔf yu di mashin we de kɔt day impɔtant if yu want am fɔ las fɔ lɔng tɛm. Klin mashin kin wok fayn ɛn i kin ɛp yu fɔ avɔyd prɔblɛm. Na sɔm simpul tin dɛn we yu kin fala fɔ mek yu mashin kɔntinyu fɔ gɛt di bɛst shep:

• Waip di day dɛn dɔŋ afta ɛni tɛm we yu yuz am fɔ pul dɔti ɛn smɔl smɔl pat dɛn. Dis kin mek di mashin wok fayn fayn wan ɛn i kin mek di mashin nɔ de rɔtin.

• Chek di pat dɛn we yu de kɔt bɔku tɛm. If yu si ɛni dɔl ed, shap am wantɛm wantɛm. Shap pat dɛn kin mek ɛni kɔt klin.

• Luk di shims di tɛm we yu de chɛk yu rutin. If dɛn luk lɛk se dɛn dɔn pwɛl, chenj dɛn so dat yu mashin go de di rayt tɛm.

• Inspek di mashin fɔ ɛni pat we lɔs ɔ we dɔn brok. If yu fiks smɔl smɔl tin dɛn kwik kwik wan, dat kin stɔp big prɔblɛm dɛn leta.

Di mashin we Oyang de yuz fɔ kɔt day gɛt strɔng bil ɛn dɛn mek am fɔ mek i izi fɔ klin am. Di smat dizayn min se yu kin rich ɔl di impɔtant pat dɛn we yu nɔ gɛt prɔblɛm. We yu de kia fɔ yu mashin ɔltɛm, dat kin ɛp fɔ mek yu ebul fɔ abop pan yu ɛn rɛdi fɔ ɛni prɔjek.

Tip: Sɛt wan mɛsej fɔ mɛmba yu fɔ klin ɛn chɛk yu mashin ɛvri wik. Dis abit de sev tɛm ɛn mɔni as tɛm de go.

Riplesmɛnt Pat dɛn

Ɛni mashin we de kɔt day go nid nyu pat dɛn sɔm tɛm. If yu yuz yu mashin ɛvride, dat kin mek sɔm pat dɛn west. I smat fɔ chɛk fɔ si if pat dɛn dɔn pwɛl ɛn chenj dɛn kwik kwik wan. Dis kin mek yu mashin kɔntinyu fɔ wok ɛn i kin ɛp yu fɔ avɔyd fɔ blo fɔ lɔng tɛm na yu wok. Oyang de mek am izi fɔ fɛn di pat dɛn we yu nid, so yu kin fiks prɔblɛm dɛn kwik kwik wan ɛn kip yu prɔjek dɛn na di rayt rod. Kwik fɔ gɛt riplesmɛnt pat dɛn min se yu nɔ go spɛn bɔku tɛm fɔ wok ɛn yu nɔ go spɛn bɔku mɔni fɔ mek dɛn ripɛnt. We yu tek kia ɔf yu mashin, i go tek kia ɔf yu biznɛs.

Afta-Sɛl Sɔpɔt We Yu De Bay

Di Opshɔn dɛn fɔ di Waranti

Afta yu bay mashin we de kɔt day, yu want fɔ no se dɛn kɔba yu if sɔntin nɔ apin. Bɔku kɔmni dɛn kin gi wan ia warranty. Dis min se yu kin gɛt fri ripa if di mashin gɛt prɔblɛm frɔm di faktri. Sɔm brand dɛn kin gi yu layflɔŋ mentenɛns bak. Yu kin kɔl dɛn fɔ ɛp, ivin sɔm ia afta yu bay di mashin.

Na dis na wetin yu kin ɛkspɛkt wit bɔku pan di day-kɔtin mashin warranty dɛn:

• Wan ia warranty fɔ pat ɛn ripɛnt

• Fri savis fɔ ɛni manifakta ishu

• Sɔpɔt fɔ mentenɛns fɔ yu layf

Oyang de gi yu ɔl dɛn bɛnifit ya. Yu kin gɛt wan ia warranty ɛn layf-taym sɔpɔt. Dis kin ɛp yu fɔ fil sef bɔt yu invɛstmɛnt. If yu mashin nid fɔ fiks, yu no se ɛp na jɔs wan kɔl away.

Tip: Aks ɔltɛm bɔt di warranty bifo yu bay. Gud sɔpɔt kin mek yu nɔ gɛt mɔni ɛn strɛs.

Kastamɔ Savis

Gret kastoma savis de mek big difrɛns we yu bay mashin we de kɔt day. Yu want ansa kwik kwik wan if yu gɛt kwɛstyɔn ɔ prɔblɛm. Oyang stand out fɔ in strɔng kastoma savis. Dɛn kin lisin to yu nid dɛn ɛn gi yu kɔstɔm sɔlvishɔn fɔ yu prɔjek dɛn. Dɛn tim kin ansa kwɛstyɔn dɛn kwik kwik wan, so yu nɔ nid fɔ wet fɔ lɔng tɛm fɔ mek dɛn ɛp yu.

Na dis na wetin mek Oyang in kɔstɔma savis spɛshal:

• Fast ansa to yu kweshon dem

• Kastom sɔlvishɔn fɔ yu biznɛs

• Friendly sɔpɔt tim we bisin bɔt yu sakrifays

If yu ɛva nid ɛp wit yu mashin, Oyang rɛdi fɔ sɔpɔt yu. Gud kastoma savis min se yu kin kɔntinyu fɔ wok witout lɔng delay. Yu nɔ jɔs gɛt mashin—yu kin gɛt patna fɔ yu biznɛs.

Notis: Kwik ɛn ɛpful sɔpɔt de mek yu day-kat mashin de rɔn fayn fayn wan ɛn yu prɔjek dɛn de na di rayt rod.

Portabiliti ɛn Projɛkt Sayz

Fiks vs. Pɔtabl Mashin dɛn

We yu luk di mashin dɛn we dɛn kin yuz fɔ kɔt day , yu go si tu men kayn dɛn. Fiks mashin dɛn kin de na wan ples. Dɛn big ɛn dɛn ebi. Dɛn mashin dɛn ya kin wok fayn na faktri ɔ big shɔp dɛn. Pɔtabl mashin dɛn kin smɔl. Yu kin muv dɛn rawnd yu wokples. Yu kin ivin kɛr dɛn go na ɔda say dɛn.

Lɛ wi kɔmpia fiks ɛn pɔtabl mashin dɛn:

Fiks mashin dɛn gɛt sɔm big bɛnifit dɛn. Dɛn kin kɔt fast ɛn mek bɔku bɔku pat dɛn ɛvri awa. Dɛn kin gi yu di sem rizɔlt ɛvri tɛm. Dɛn de wok fayn fɔ big big ɔda dɛn.

Bɔt fiks mashin dɛn gɛt bad tin dɛn bak. Dɛn kin kɔst mɔ fɔs. Dɛn nɔ kin chenj dizayn izi wan. Dɛn kin bɛn ɔ pres matirial dɛn tumɔs.

Pɔtabl mashin dɛn difrɛn. Dɛn nɔ kin tek bɔku mɔni ɛn dɛn kin fayn fɔ smɔl wok dɛn. Dɛn kin kɔt fayn fayn shep dɛn ɛn tik tik tin dɛn.

Bɔt, pɔtabl mashin dɛn kin slo. Dɛn nid mɔ wok frɔm yu.

Tip: If yu nid fɔ muv yu mashin ɔ du bɔku kɔstɔm prɔjɛkt dɛn, pɔtabl day-kata na fayn tin fɔ pik. Fɔ big wok dɛn we dɛn kin du fɔ ripit, na fiks mashin kin wok fayn.

Big vs. Smɔl Projɛkt dɛn

Projek saiz impɔtant we yu de pik yu mashin. Big big wok dɛn lɛk fɔ mek bɔku bɔku bɔks dɛn, nid fɔ gɛt mashin we nɔ de chenj. Dɛn mashin dɛn ya kin ebul fɔ du bɔku bɔku tin dɛn ɛn dɛn kin mek yu wok nɔ chenj. Smɔl prɔjek dɛn, lɛk kɔstɔm kad ɔ shɔt rɔn, kin fit bɛtɛ wit pɔtabl mashin. Yu kin chenj dizayn dɛn kwik kwik wan ɛn tray nyu aidia dɛn.

Na dis na wan kwik gayd:

• Yuz wan mashin we nɔ de chenj fɔ:

  • Mas prodakshɔn

  • Simpul, ripit dizayn dɛn

  • Fɔ kip mɔni pan big ɔda tin dɛn

• Yuz pɔtabl mashin fɔ:

  • Kastom shep ɛn shɔt rɔn dɛn

  • Kraft ɔ smɔl biznɛs nid dɛn

  • Fɔ wok wit tik ɔ spɛshal tin dɛn

Tink bɔt wetin yu de mek mɔ. If yu wan grow yu biznis and du big wok, fiks mashin laik Oyang’s Automatic Die Cutting & Creasing Machine na strong pik. If yu lɛk kraf ɔ nid fɔ muv yu mashin, go wit wan we yu kin kɛr go. Di rayt tin we yu kin disayd fɔ du kin ɛp yu fɔ wok kwik ɛn smat ɛvride.

If yu aks gud kwɛstyɔn dɛn bifo yu bay mashin we de kɔt day, yu go disayd fɔ du bɛtɛ tin. Masta sabi bukman dɛn se yu fɔ du sɔm tin dɛn. Fɔs, tɛl ɔda pipul dɛn wetin yu nid ɛn ɔmɔs ples yu gɛt. Dis kin ɛp yu fɔ fɛn di bɛst mashin fɔ yu. Neks, tɔk bɔt ɔmɔs ɔda tin dɛn yu kin gɛt ɛn us prɔblɛm dɛn yu kin si bɔku. Dis kin ɛp yu fɔ stɔp mistek bifo dɛn apin. Tɔk klia wan ɔltɛm so dat yu nɔ go fil bad bɔt wetin yu dɔn disayd leta.

Yu kin yuz dis chɛklist fɔ ɛp yu fɔ pik wan mashin we de kɔt day we fit yu prɔjek dɛn ɛn yu ples. Oyang gɛt smat sɔlvishɔn dɛn we yu kin kɔnt pan.

FAQ we dɛn kin aks

Aw a go no us mashin we de kɔt day fit mi prɔjek?

Tink bɔt yu prɔjek saiz ɛn matirial. Chek di mashin speks. Aks di pɔsin we de gi yu di tin dɛn fɔ advays. Oyang in tim kin ɛp yu fɔ pik di rayt mɔdel fɔ yu nid dɛn.

Yu tink se Oyang in mashin kin kɔt tik tik kadbɔd?

Yɛs! Oyang in Ɔtomatik Day Kɔtin & Kris Mashin de handle kadbɔd we tik te to 4 mm. I de wok fayn fɔ pak ɛn ɔda wok dɛn we ebi ebi.

Yu tink se i at fɔ mek wan Oyang mashin we de kɔt day?

Nɔ, i rili izi. Di kɔntrol panɛl de sho klia stɛp dɛn. Yu kin fala di instrɔkshɔn dɛn we de na di skrin. Di wan dɛn we de bigin kin bigin kwik kwik wan we dɛn nɔ gɛt strɛs.

Wetin go apin if mi mashin brok?

Nɔ wɔri! Oyang de gi yu wan ia warranty ɛn layf-taym sɔpɔt. Yu kin kɔntak dɛn tim fɔ ɛp dɛn kwik kwik wan ɛn fɔ mek dɛn chenj di pat dɛn.