10 Kɔmɔn Kɔz fɔ Print Misrɛjista na Fleksografik Printin

Introdyushɔn to Print Misrɛjista insay Fleksografik Printin

Wetin na Fleksografik Printin?

Fleksografik printin, we dɛn kin kɔl flexo, na wan we fɔ rotary wɛb rilif printin we de yuz fleksibul fotopolima printin plet dɛn. Dɛn kin yuz am bɔku bɔku wan na di pak industri fɔ print pan difrɛn sabstret dɛn, lɛk pepa, plastic, mɛtal fim, ɛn kɔrɛkt bod.

Ɔndastand aw fɔ Rɛjista fɔ Print

Print rɛjista de tɔk bɔt di prɛsis alaynɛshɔn fɔ difrɛn kɔlɔ separeshɔn ɔ print ɛlimɛnt dɛn na wan sabstret. We dɛn de print bɔku bɔku kɔlɔ dɛn, dɛn kin yuz ɛni kɔlɔ difrɛn difrɛn kɔlɔ dɛn, ɛn dɛn kɔlɔ dɛn ya fɔ alaynɛd ​​fayn fayn wan fɔ mek di pikchɔ ɔ tɛks we dɛn want fɔ mek.

Wetin na Print Misrɛjista?

Print misrɛjista kin apin we di difrɛn kɔlɔ ɔ ɛlimɛnt dɛn na wan print wok nɔ alaynɛd ​​kɔrɛkt wan. Dis kin mek di pikchɔ dɛn nɔ klia, di kɔlɔ dɛn kin chenj, di gɔst ifɛkt dɛn, ɔ di say dɛn we pɔsin kin si bitwin di kɔlɔ dɛn. If tin tranga, i kin mek pɔsin nɔ ebul fɔ rid di tɛks ɔ i kin chenj di we aw di grafik dɛn we dɛn print de luk bad bad wan.

Impɔtant fɔ Rɛjista fayn fayn wan na Flexo Printing

Fɔ rɛjista fayn fayn wan impɔtant fɔ mek dɛn print fleksografik fɔ sɔm rizin dɛn:

1. Kwaliti: I de mek shɔ se pikchɔ ɛn tɛks shap, klia, we impɔtant fɔ pak di prɔdak ɛn lɛbul.

2. Brand Integrity: If yu nɔ rɛjista di rayt we, dat kin chenj di logo ɛn di brand kɔlɔ, ɛn dis kin ambɔg di we aw pipul dɛn de si di brand.

3. Rigyuletɔri Kɔmplians: Insay industri dɛn lɛk famasitik ɛn fɔ pak it, if yu nɔ rɛjista fayn, dat kin mek yu gɛt infɔmeshɔn we yu nɔ ebul fɔ rid ɔ we nɔ kɔrɛkt, ɛn dis kin mek yu nɔ fala di tin dɛn we di lɔ se.

4. Kɔst Efisiɛns: We dɛn nɔ de rɛjista fayn, dat kin mek dɛn west mɔ ɛn mɔ ɛn dɛn kin print dɛn bak, ɛn dis kin mek di kɔst fɔ prodakshɔn go ɔp.

Kɔmɔn Sayn dɛn fɔ Misrɛjista

1. Imej dɛn we nɔ klia ɔ we nɔ gɛt tu tɛm

2. Kɔlɔ fringing rawnd tɛks ɔ imej edj dɛn

3. Kɔlɔ miks ɔ ɔvalap we yu nɔ bin want

4. Wayt gap dɛn we pɔsin kin si bitwin di say dɛn we dɛn kin gɛt kɔlɔ

5. Inkɔnsistɛns print kwaliti akɔdin to di sabstret

Factors we Afɛkt Rɛjista na Flexo Printing

Bɔku tin dɛn kin afɛkt di we aw dɛn kin rɛjista fɔ print na fleksografik printin:

1. Mekanikal Fakta: Inklud prɛs sɛtup, gia kwaliti, ɛn silinda ɛksentrisiti.

2. Matirial Factors: Lεk di plet kwaliti, di sabstεrayt prכpati, εn ink kכntribyushכn.

3. Di Tin dɛn we De Insay di Envayrɔmɛnt: I inklud di tɛmpracha, di humidity, ɛn statik ilɛktrishɔn.

4. Opareshɔn Fakta: Lɛk prɛs spid, tɛnsiɔn kɔntrol, ɛn ɔpreshɔn skil.

Di Impekt we Misrɛjista Gɛt

If yu nɔ rɛjista di rayt we, dat kin mek yu gɛt bɔku prɔblɛm dɛn:

1. Waste we de bɔku: Bɔku tɛm, dɛn kin nid fɔ trowe di tin dɛn we dɛn nɔ print fayn.

2. Di Kɔst we Ay: Bikɔs ɔf di tin dɛn we dɛn dɔn west, di tɛm we dɛn kin sɛtup fɔ lɔng tɛm, ɛn we dɛn kin print bak.

3. Ridyus Prodaktiviti: Tɛm we dɛn spɛn fɔ sɔlv prɔblɛm ɛn kɔrɛkt di prɔblɛm dɛn we gɛt fɔ du wit rɛjista.

4. Di Kastoma Nɔ Satisfay: If di print kwaliti nɔ fayn, dat kin mek dɛn nɔ gri fɔ tek ɔda ɔda tin dɛn ɛn dɛn kin lɔs dɛn biznɛs.

10 Kɔmɔn Kɔz fɔ Print Misrɛjista na Fleksografik Printin

1. Fɔ Maunt Plɛt we Nɔ Fayn

Aw i kin apin:

• Plɛt dɛn nɔ alaynɛd ​​kɔrɛkt wan na di plet silinda

• Di plet tik we nɔ kɔrɛkt ɔ di kusɛn we dɛn nɔ pik di rayt we

Fɔ sɔlv:

• Yuz prɛsishɔn plet mawntin ikwipmɛnt

• Impliment standad maunt prosidur

• Mek shɔ se yu pik di plet ɛn kusɛn fayn fayn wan fɔ ɛni wok

2. Gia dɛn we dɔn pwɛl ɔ we dɔn pwɛl

Aw i kin apin:

• Nɔmal wear ɛn tear ova tɛm

• Nɔ mentenɛns ɔ lɔbrik we nɔ fayn

• Yuz di tin dɛn we nɔ rayt na di gia

Fɔ sɔlv:

• Impliment di gia inspekshɔn ɛn mentenɛns schedule ɔltɛm

• Riples di gia dɛn we dɔn pwɛl kwik kwik wan

• Yuz ay kwaliti gia matirial dɛn we nɔ de west

3. Inkɔrɛkt Anilɔks Rola Prɛshɔn

Aw i kin apin:

• Improper setup of anilox rola prɛshɔn agens di plet

• Prɛshɔn we nɔ ivin akɔdin to di wit we di rɔla gɛt

Fɔ sɔlv:

• Yuz prɛshɔn gej fɔ mek shɔ se yu gɛt prɛshɔn ɔltɛm

• Impliment di rayt anilox rola setup prosidur

• Rigyul kalibreshɔn fɔ prɛshɔn sɛtin dɛn

4. Sabstret Tɛnshɔn Isyu dɛn

Aw i kin apin:

• Tɛnshɔn we nɔ kɔnsistɛns ɔlsay na di printin prɔses

• Di sɛtin dɛn we nɔ fayn fɔ di tɛnsiɔn kɔntrol sistem

Fɔ sɔlv:

• Instɔl ɛn mentenɛt di rayt wɛb tɛnsiɔn kɔntrol sistem dɛn

• Kalibrayt tɛnsiɔn sɛns dɛn ɔltɛm

• Adjɔst tɛnsiɔn sɛtin fɔ difrɛn kayn sabstret dɛn

5. Plɛt Silinder Ɛksɛntrisiti

Aw i kin apin:

• Difεkt dεm we de fכ mek di silinda dεm

• Wear ɛn tear as tɛm de go

• I nɔ fɔ ol ɔ kip di silinda dɛn di rayt we

Fɔ sɔlv:

• Inspekshɔn fɔ plet silinda dɛn ɔltɛm fɔ si if dɛn gɛt kɔnsɛntrisiti

• Yuz silinda dɛn we dɛn mek wit prɛsishɔn

• Di rayt we fɔ kip ɛn handle fɔ silinda dɛn

6. Ink Viskositi we nɔ kɔnsistɛns

Aw i kin apin:

• Di tɛmpracha kin chenj na di prɛs rum

• I nɔ miks ɔ pripia ink di rayt we

• Evaporation of solvents durin lɔng print rɔn

Fɔ sɔlv:

• Yuz ɔtomatik ink viskɔsiti kɔntrol sistem dɛn

• Implimɛnt di rayt we fɔ pripia ɛn kip ink di rayt we

• Monitor ɛn ajɔst ink viskɔsiti ɔlsay na di print rɔn

7. Tɛmpratura Fluktueshɔn

Aw i kin apin:

• Klaymat kɔntrol we nɔ fayn na di prɛs rum

• Ɔt we di printin prɔses de mek

• Sizin chenj dɛn we de afɛkt di ikwipmɛnt ɛn matirial dɛn

Fɔ sɔlv:

• Instɔl ɛn mentenɛt di rayt klaymat kɔntrol sistem dɛn

• Monitor di tɛmpracha ɔlsay na di printin prɔses

• Adjɔst di ikwipmɛnt sɛtin fɔ kɔmpɛns fɔ di chenj dɛn we di tɛmpracha de chenj

8. Bia dɛn we dɔn pwɛl ɔ we nɔ fayn

Aw i kin apin:

• Nɔmal wear ɛn tear ova tɛm

• Lubrik we nɔ fayn

• Misalignment we dɛn de instɔl ɔ mentenɛns

Fɔ sɔlv:

• Impliment rɛgyula bia inspekshɔn ɛn mentenɛns schedule

• Yuz di rayt we fɔ mek di lɔbrik ɛn di tɛm we yu fɔ du am

• Mek shɔ se dɛn alaynɛd ​​di rayt we we dɛn de instɔl ɛn riples di bia

9. Sɛtin dɛn fɔ Impreshɔn we Nɔ Fayn

Aw i kin apin:

• Inkɔrɛkt sɛtup fɔ impreshɔn prɛshɔn bitwin plet ɛn sabstret

• Ivin impreshɔn akɔdin to di wit fɔ di prɛs

Fɔ sɔlv:

• Yuz impreshɔn sɛtin gej fɔ prɛsis sɛtup

• Impliment standad impreshɔn sɛtin prosidyuz

• Rigyul kalibreshɔn fɔ impreshɔn sɛtin dɛn

10. Wɛb Gayd Sistɛm Malfunctions

Aw i kin apin:

• Wear ɛn tear pan wɛb gayd kɔmpɔnɛnt dɛn

• Improper setup ɔ kalibreshɔn fɔ wɛb gayd sistɛm

• Nɔ fit wɛb gayd sistem fɔ di sabstret we dɛn de yuz

Fɔ sɔlv:

• Inspekshɔn ɛn mentenɛns fɔ di wɛb gayd sistɛm dɛn ɔltɛm

• Prɔpa kalibreshɔn ɛn sɛtup fɔ ɛni wok

• Yuz di rayt wɛb gayd teknɔlɔji fɔ difrɛn sabstret dɛn

We dɛn adrɛs dɛn kɔmɔn tin dɛn ya we kin mek pipul dɛn nɔ rɛjista di rayt we fɔ print, flekografik printa dɛn kin rili ɛp fɔ mek di print kwaliti bɛtɛ ɛn ridyus di west. Fɔ mek dɛn mentenɛns ɔltɛm, fɔ tren dɛn fayn fayn wan, ɛn fɔ put mɔni pan kwaliti ikwipmɛnt na di men tin fɔ mek dɛn nɔ gɛt bɔku prɔblɛm dɛn.

komodi we dɛn kin rɛkɔmɛnd

CI Flexo printin mashin (web wit: 800-1400mm)

Diskripshɔn fɔ di Prodak:

Sɛntral impreshɔn fleksografik printin mashin mit di rikwaymɛnt dɛn fɔ di mɔs dimand pakej printin aplikeshɔn dɛn.Dis kayn prɛs de gi ay print kwaliti ɛn rɛjista akkuracy. I kin print pan PE, PP, OPP, PET, Pepa ɛn ɔda tin dɛn.

Dɔn

Fɔ ɔndastand ɛn manej print rɛjista na impɔtant tin fɔ fleksografik printin. I nid fɔ gɛt wan kɔmbaynshɔn fɔ mentenɛns di ikwipmɛnt dɛn fayn fayn wan, fɔ yuz am fayn fayn wan, ɛn fɔ kɔntinyu fɔ kɔntrol di kwaliti. We dɛn adrɛs di difrɛn tin dɛn we kin mek pipul dɛn nɔ de rɛjista fayn, di wan dɛn we de print kin mek di kwaliti bɛtɛ, ridyus di west, ɛn mek dɛn ebul fɔ print ɔltin fayn fayn wan we dɛn de yuz fɔ print we dɛn de yuz fɔ print.

Fɔ gɛt ɛkspɛkt gayd ɛn tɛknikal sɔpɔt pan yu printin mashin prɔjek, kɔntak Oyang. Wi injinia dɛn we gɛt ɛkspiriɛns go ɛp yu fɔ no di prɔblɛm, gi yu advays dɛn we go ɛp yu fɔ mek shɔ se yu gɛt di bɛst rizɔlt. Patna wit Oyang fɔ sakrifays. Wi go tek yu prodakshɔn kapabiliti to di nɛks lɛvul.